618-599-2748 or 815-739-8374

E2U Waterbase Urethane 1 Gal

Call for Price

A premium high solids 2-component water base urethane provides the equal superior performance to Polyaspartic without any odor, health or environmental issues.

Clear
SKU: WBU01 Categories: ,
DESCRIPTION

Description

A premium high solids 2-component water base urethane provides the equal superior performance to Polyaspartic without any odor, health or environmental issues. E2U Water based Urethane (WBU) is VOC compliant in California. It gives hard, durable coatings that features good gloss, superior abrasion resistance and UV resistance. E2U WBU has been formulated to offer a high performance finish coat for seamless flooring, coating and architectural concrete applications where odor and heath concern are sensitive. Typical areas of application are clean rooms, hospitals, grocery stores, walkways, garage floor, parking structure, air.craft hangers and automotive repair facilities. Satin finish is available.
Product Data
Volumetric Ratio
Solids Content…………………………… 54%
Coverage 250 -300 SF/gal.
VOC……………………………………………….47g/l
Cure times (78 degrees, 30% R.H)
Pot Life………………………………………. 3 hours
Dry to Touch………………………4 – 6 hours
Recoat……………………………….10 -12 hours
Light Traffic………………………18 -24 hours
Full Cure…………………………….5 -7 days

Higher Temp & Lower humidity will accelerate cure times. Lower temp
& higher humidity will lengthen cure time.
Pot Life is reduced by increasing temperature and/or mass Performance Properties
Gloss, Clear…………………………. 91
Pendulm hardness, ………………182
Tabor Abrasion-1000gm.Load
1000 cycles, CS17 Wheel …….32mg.loss……………………….Kit size 1Gal & 4gal
Packaging
1 Gallon Kit:
Part A . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.75 gal.
Part B. . . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 gal.

4 Gallon Kit:
Part A . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 gal.
Part B. . . . . . . . . . . . . . . . . . . . . . . . . . . 1 gal.

ADVANTAGES

Advantages

Easy clean-up, Long pot life (3 hours)
Excellent coverage-hide

INSPECTION

Inspection

Surface must be structurally sound, dry, and free of oil, grease, curing agents, dirt, dust or other foreign matter. Surface must be roughed up or porous. This product is designed for use over untreated concrete surfaces free from wax, dusting preventive sealers, deep penetrating
sealers, bond breaking compounds and release agents and other similar chemicals that will interfere with proper adhesion and lead to premature coating failures.

SURFACE PREPARATION

Surface Preparation

Prepare surface by sanding, grinding, dry or wet sandblasting or shot blasting to achieve a clean, porous and uniform surface that will allow the product to penetrate the surface. Bead or shot-blasting is the most reliable method of preparation. Clean surface entirely with TSP and
rinse completely with water several times. Concrete surface can be acid etched and then must be neutralized and rinsed. Acid etching does not clean the surface.

MILDEW

Mildew

DO NOT PAINT OVER MILDEW. Mildew is a fungus, brown, black, gray or even white in color, and will rapidly grow through any coating applied over it. A solution of 50% household bleach and 50% water will kill the mildew. See precautions on bleach label for handling before using.

MIXING

Mixing

MIX 3 PARTS “A” WITH 1 PART “B” IN BATCHES NO LARGER THAN 4 GALLON AT A TIME.
Top Coat: In a clean and dry bucket, mix 3 parts A and 1 part B together using an agitator, jiffy mixer or stir stick. Mix slowly for at least 2 minutes or until completely combined. Prepare only the amount you can use in 3 hours at 78F. (Higher temperatures reduce work time). Do not leave the mixed epoxy in the bucket longer than 4 hours.

APPLICATION INSTRUCTIONS

Application Instructions

For best results on horizontal surfaces, pour the entire mixture evenly onto the surface as soon as possible after mixing. Use 3/8″ nap roller or squeegee to spread mixture over the surface, back rolling the area to be coated. For best results apply at least two coats at 200-250 sq. ft. per gallon. Clean tools with soap and water before curing begins. To increase skid resistance, stir in approved non-skid additive into your A & B mixture.

CONCRETE SURFACE APPLICATION

Concret Surface Application

Concrete surfaces should be clean, dry, and free of disintegrating chalky material or previously applied coatings to insure satisfactory results. To increase adhesion, dense or machine troweled concrete surfaces should be prepared mechanically as described in surface preparation or etched with a solution of one part muriatic acid and two-parts clean water. The surface profile should resemble 80 grit sandpaper to be suitable for coating. Neutralize the surface by applying a mixture of 1 lb. baking soda mixed into 1 gal of water and rinse thoroughly. Clean all surfaces with T.S.P. and rinse with clean water.

COVERAGE

Coverage

Three (3) mil dry film at 200 sq. ft. per gallon. Six (6) mil dry file at 100 sq. ft. per gallon.

DATASHEET & MSDS

Datasheet & MSDS

Waterbase Urethane DataSheet