618-599-2748 or 815-739-8374

E2U Waterbase Acrylic Sealer 1 Gal.

Call for Price

E2U WL (Wet Look) Waterbase Acrylic Sealer is formulated with Properly applied, E2U WL Waterbase Acrylic Sealer dries to a clear, abrasion resistant film which provides a weatherproof, sealer that is resistant to the sun, moisture, industrial chemicals, oil, grease, and most caustic cleaning agents.

Description

Description

E2U WL (Wet Look) Waterbase Acrylic Sealer is formulated with Properly applied, E2U WL Waterbase Acrylic Sealer dries to a clear, abrasion resistant film which provides a weatherproof, sealer that is resistant to the sun, moisture, industrial chemicals, oil, grease, and most caustic cleaning agents. E2U WL Waterbase Acrylic Sealer will extend the surface life to organic surfaces. When properly applied, its exceptional penetrating properties will sealconcrete and other surfaces keeping them easy to clean and maintain. Regular cleanup and maintenance procedures can be easily implemented. E2U WL Waterbase Acrylic Sealer will not yellow and will give wetlook on concrete. Multiple coats will increase the gloss to desired level. Areas showing excessive wear can be re-coated when desired. E2U WL Waterbase Acrylic Sealer will apply milky white to ensure complete coverage, but dries to a transparent, durable gloss finish.

Product Data

Volumetric Ratio: . . . . . . . . . . . . . . . . Single Component
Solids: . . . . . . . . . . 26% (+ or – 1%)
Coverage: . . . . . 200-300 SF/gal.
Application Slab Temperature: . . . . . . . . . . 55-95°F
Thinning: . . . . . . . . . . . . . . . . . Not Required

 

Applications

Applications

For use over Stone, Concrete floors, driveways and other natural surfaces where high quality, light stable sealing requirements are mandatory.

Concrete Preparation

Concrete Preparation

Surfaces to be sealed must be clean, dry, and free of oil, stains and silicone compounds. Do not apply E2U Acrylic Sealer until all traces of curing compounds have been completely dissipated. Substrate to be coated must be moisture free. Dries to touch in 30 minutes and may be opened to normal traffic after 2 hours, heavy traffic after 24 hours. Do not apply if air temperature and/ or temperature of substrate are less than 50 degrees F. Excellent for use over colored concrete, expect a slight color change. E2U Acrylic Sealer will enhance colors. Always, do a test panel for approval.
DISARM ALL SPRINKLER SYSTEMS 48 HOURS PRIOR TO APPLICATION AND DURING CURE TIME.

Application Instructions

Application Instructions

E2U Acrylic Sealer may be applied by a brush, roller, lamb’s wool applicator or industrial sprayer. Avoid any excessive buildup or puddling of product. E2U Acrylic Sealer may be applied in multiple coats to achieve desired degree of protection and gloss.

Physical Properties

Physical Properties

Boiling Point: Over 285° F
Evaporation Rate: Less than 1 (n-Butyl Acetate = 1)
% Volatile by Weight: 38-49(Theoretical)
Vapor Density: Not Determined

Hazardous Components

Hazardous Components

COMPONENT CAS # % BY WEIGHT VAPOR PRESSURE
Mineral Spirits 64742-47-8 14-18 2.60
Light Aromatic Naphtha 64742-95-6 16-24 Less 10.0 @ 25° C
Proprietary Solvent, VOC exempt 98-56-6 7-11 N/A
Coverage

Coverage

Approximately 200 – 300 sq. ft. per gallon, depending on substrate and application method.
Note: Test a small area before applying. NEVER THIN MORE THAN 10% BY VOLUME USING ACETONE!

Safety

Safety

Use only in well ventilated areas. Always use gloves, protective eyewear and clothing. Overexposure to this product may cause SERIOUS HEALTH RISKS. If ingested do not induce vomiting, call a physician immediately.

Clean Up

Clean Up

Equipment should be immediately cleaned with Acetone.

Warranty

Warranty
E2U products are warranted for one year after date of application. Please refer to the Limited Material warranty for additional clarification.

Datasheet & MSDS

Datasheet & MSDS

Waterbased Sealer Data Sheet