618-599-2748 or 815-739-8374

E2U Water Based Epoxy 1.25 Gal.

$67.78

A premium quality 2-component water base epoxy concrete sealer/primer that provides epoxy toughness, chemical resistance and durability with the convenience of a water base VOC free system.

Clear
Questions about this product?
SKU: 3000WB Categories: ,
Description

Description

A premium quality 2-component water base epoxy concrete sealer/primer that provides epoxy toughness, chemical resistance and durability with the convenience of a water base VOC free system.

Physical PropertiesVolumetric Ratio: . . . . . . . . . . . . .. . . 4 to 1
Solids . . . . . . . . . . . . . . . .  . . .50% (+ or – 1%)
Coverage:  . . . . . . .. . .200 SF/gal. undiluted
.     300 – 400 SF/gal. mixed with 64 oz.water
.               to every pre-blended gallon of epoxy
Pot life: . . . . . . . . . . . . .  . . . . . . .  . .  . . 3 hours
Working time on floor:  . . . .  30-45 minutes
Cure time: . . . . . . . . .  . .. . ..45 mins to 2 hours

Colors
Novolac Epoxy is available with standard premixed colors. The color kits provide the user with stock versatility. By broadcasting Silica Sand, endless color and texture combinations can be created.

Standard Colors:

Light Gray Mocha
Medium Gray Tile Red
Dark Gray Safety Red
White Safety Blue
Black Safety Green
Tan Safety Yellow
Beige

Finish
Gloss

Packaging
1.25 Gallon Kit:
Part A . . . . . . . . . . . . . . . . . . . . . . . .1gal (128 oz)
Part B. . . . . . . . . . . . . . . . . . . . . . ..Quart (32 oz)

Packaging
5 Gallon Kit:
Part A . . . . . . . . . . . . . . . . . . . . . .. 4gal (512 oz)
Part B. . . . . . . . . . . . . . . . . . . . . .  . 1gal (128 oz)

PRODUCT LIMITATIONS
Ground level concrete slabs emit invisible moisture vapor.

WARRANTY
E2U products are warranted for 12 months from the date of manufacturing when kept in the original unopened container. Please refer to the Limited Material warranty for additional clarification..
SAFETY
Consult Novolac Epoxy material safety data sheet. Avoid contact with skin. Some individuals may be allergic to epoxy resin. Protective gloves and clothing are recommended.

Applications

Applications

Easy water clean-up
Long pot life (3 hours)
Excellent coverage-hide
Fast drying (30 mins – 2 hrs)
Unsurpassed Adhesion
Excellent chemical and solvent resistance

Inspection

Surface must be structurally sound, dry, and free of oil, grease, curing agents, dirt, dust or other foreign matter. Surface must be roughed up or porous. This product is designed for use over untreated concrete surfaces free from wax, dusting preventive sealers, deep penetrating sealers, bond breaking compounds and release agents and other similar chemicals that will interfere with proper adhesion and lead to premature coating failures.

Surface Preparation

Surface Preparation

Prepare surface by sanding, grinding, dry or wet sandblasting or shot blasting to achieve a clean, porous and uniform surface that will allow the product to penetrate the surface. Bead or shotblasting is the most reliable method of preparation. Clean surface entirely with TSP and rinse completely with water several times. Concrete surface can be acid etched and then must be neutralized and rinsed. Acid etching does not clean the surface.

Mildew

Mildew

DO NOT PAINT OVER MILDEW. Mildew is a fungus, brown, black, gray or even white in color, and will rapidly grow through any coating applied over it. A solution of 50% household bleach and 50% water will kill the mildew. See precautions on bleach label for handling before using.

Mixing

Mixing

MIX 4 PARTS “A” WITH 1 PART “B” IN BATCHES NO LARGER THAN 1.25 GALLON AT A TIME EXCEPT AS NOTED ABOVE UNDER “SELF PRIMING REQUIREMENTS”.
Top Coat: In a clean and dry bucket, mix 4 parts A and 1 part B together using an agitator, jiffy mixer or stir stick. Mix slowly for at least 2 minutes or until completely combined. Prepare only the amount you can use in 2 hours in quantities of no more than 1 gallon at a time. Do not leave the mixed epoxy in the bucket longer than 4 hours.

Application Instructions

Application Instructions

For best results on horizontal surfaces, pour the entire mixture evenly onto the surface as soon as possible after mixing. Use a 3/8″ nap roller or squeegee to spread mixture over the surface, backrolling the area to be coated. For best results apply at least 2 coats at 250 sq. ft. per gallon. Clean tools with soap and water before curing begins. To increase skid resistance, stir in an approved non- skid additive into your A & B mixture .

Coverage

Coverage

Three (3) mil dry film at 250 sq. ft. per gallon. Six (6) mil dry film at 125 sq.ft. per gallon .

Concrete Surface Preparation

Concrete Surface Preparation

Concrete surfaces should be clean, dry, and free of disintegrating chalky material or previously applied coatings to insure satisfactory results. To increase adhesion, dense or machine troweled concrete surfaces should be prepared mechanically as described in surface preparation or etched with a solution of one part muriatic acid and two-parts clean water. The surface profile should resemble 80 grit sandpaper to be suitable for coating. Neutralize the surface by applying a mixture of 1 lb. baking soda mixed into 1 gal of water and rinse thoroughly. Clean all surfaces with T.S.P. and rinse with clean water.

Thinning

Thinning
When using this product as a Primer, thin slightly with water if necessary. To thin add up 1⁄2 gallon of water to a pre-blended 1 gallon of Part A and Part B mixture and blend slowly and thoroughly .

Drying Time/Cure Time

H1>Drying Time/Cure Time

Under normal Conditions (70oF & 50% Humidity) dries to touch in 30 minutes to 2 hours depending on formulation. May be recoated when dry to the touch. Do not apply to surfaces when ambient or surface temperatures are below 50oF. Higher temperatures and lower humidity will accelerate cure times and reduce working time .

Application in Extremely Hot Weather

Application in Extremely Hot Weather

1. Dampen the floor surface to be coated. (Do not saturate)
2. In a large bucket, mix and prepare no more than a 1 gallon kit at time.
3. Pour entire mixture evenly onto the horizontal surface to be coated.

Clean Up

Clean Up

Soap and water. (Before curing begins)

Datasheet & MSDS