618-599-2748 or 815-739-8374

E2U Epoxy Accelerator – 16 oz

Call for Price

E2U Epoxy Accelerator is an additive to be used for both pigmented and clear epoxies.

SKU: 1000EA Categories: ,
Description

Description

E2U Epoxy Accelerator is the special additive for use with epoxies (100% Solids Epoxy & Moisture Vapor Barrier Epoxy) to accelerate the cure rate and allow for coating application at temperatures down to 35°F (2°C). E2U Epoxy Accelerator is an additive to be used for both pigmented and clear epoxies. NOTE: E2U Epoxy Accelerator greatly increases the cure rate of these systems, reducing both pot life and dry time.

Product Data

Product Data Volume Solids. . . . . . . . . . . . . . . . . . . . . .100 %
Color . . . . . . . . . . . . . . . . . . . . . .Clear Amber
Application Temperature …. 35 °F- 90°F
Thinning ……………. Not Required
Pot life ………………. 30-120 min.
Storage Temperature.. … Minimum 20°F (-7°C) Maximum 110°F (43°C)
Shelf life ……………….. 24 months.
USDA Food & Beverage ….. Meets Req

Physical Properties

 

 

 

 

 

 

Mixing

Mixing

Prior to adding E2U Epoxy Accelerator, properly mix the Part A & Part B components according to the mixing instructions listed on the product data sheet. Accurately add one 16 ounce of E2U Epoxy Accelerator, per 1.5 gallon of material. Continue agitation until thoroughly mixed.

Note: Components should be above 50°F (10°C) prior to mixing.

Note

Note

Curing time varies with surface temperature, air movement, humidity and film thickness. Components should be above 50°F (10°C) prior to mixing.

For optimum application properties, the material temperature should be above 60°F (16°C).

Clean Up

Clean Up

Use lacquer thinner for tool cleaning. Clean hands and exposed skin with
a citrus based hand cleaner.

Warranty

Warrant

E2U products are warranted for one year after date of purchase. Please refer to the Limited Material warranty for additional clarification.

Handling Precautions

Handling Precautions

Use only with adequate ventilation. Appropriate cartridge-type respirator must be used during application in confined areas. Avoid contact with skin. Some individuals may be allergic to epoxy resin. Protective gloves and clothing are recommended. KEEP OUT OF REACH OF CHILDREN.

Datasheet